Price

 $200.00 ( per set)

Application

• Race cars with rubber donut drives

Description

• Donut saver plates sandwich the donut to protect your headers, frame, brake lines, and anything else close to the rear axles.

Features

• Protects valuable chassis and drivetrain parts from the forward inertia that drives the wheel and axle forward, interfering with other car components.
• Removal of the stub axle from the transmission or the axle from the upright is NOT required:
• Simply remove the donut and sandwich it between two of the donut saver plates and reconnect the donut.
• The donut offset should compensate for the thickness of the plates
• If necessary, track width can be increased 0.15 inches.
• There are 6 bolts on the donut.
• 3 alternate bolts go through the save plate on one side of the donut
• The other 3 bolts go through the other save plate on the opposite side of the donut.